About Us

Revolve Truck Stake Panels are mainly for a tradesman, Construction, landscapers, demolition, collecting garbage and many more. If you want to extend your rear truck bed to make it taller, than you came to the right place. We made this product because we are in the construction industry, we haul garbage and material from time to time. We use to fill the truck up and put temporary plywood on each side of the bed to make it taller. We also put a tarp and tied it down with a rope. It used to take us time to pack it the right way so things would not fall and it took us time to tie/untie the rope. It also made it so much more expensive to dump the garbage since it was not a lot of garbage that we were dumping at once. Now that we made the truck bed taller, we are able to fill the truck with double the load than the original amount of garbage & without any worries of the plywood/garbage flying away. Some people build it themselves with wood bolted together or go to a steel company to install it with bolts and weld everything together which cost a lot more money going to a steel company. Not only does it cost a lot more money to built it with steel but it takes away time from your business since you have to leave it in the shop for a few days. This product that we are selling does not rust as steel, and does not decay as wood in bad weather. Not only does it last for a longer period of time but it is sturdy and compact. We stand by our product & you will not have to worry whether it will rattle while you drive. Another great thing, is that we can also powder coat the product with a variety of colors that you may choose from. This will also make it look good on your truck but also protect the aluminum for years down the line.